What is the unit circle?
The unit circle is the circle of radius 1 centred at the origin. Start at the point (1, 0) and turn anticlockwise through an angle θ: the point where you land has coordinates
(x, y) = (cos θ, sin θ)
That sentence is the definition of cosine and sine for every angle — not only the acute angles that fit inside a right triangle. Cosine is how far right (or left) the point is; sine is how far up (or down). In the explorer the blue segment along the x-axis is cos θ and the orange vertical segment is sin θ. Together with the radius they form the reference triangle, whose hypotenuse is always 1.
How to use the explorer
- Drag the point, click on the circle, move the slider, or type an angle in degrees or radians (for example
150or5pi/6). - Tick Snap to special angles to jump between the multiples of 30° and 45°, where the values have neat exact forms.
- Use the Label special angles buttons to print all sixteen special angles around the circle in degrees or in radians.
- Watch the lower panel: the same angle is marked on the sine and cosine graphs.
Degrees and radians
A radian measures an angle by the length of arc it cuts from the unit circle. The whole circumference is 2π, so 360° = 2π radians and 180° = π radians. To convert, multiply degrees by π/180: 150° = 150 · π/180 = 5π/6.
The special angles and their exact values
Two triangles give every exact value on the chart. Half of an equilateral triangle with side 1 has sides 1/2, √3/2 and 1 (angles 30° and 60°). Half of a unit square cut along its diagonal, scaled so the hypotenuse is 1, has two sides of √2/2 (angle 45°). The Pythagorean theorem confirms both: (1/2)² + (√3/2)² = 1 and (√2/2)² + (√2/2)² = 1.
| θ | 0° | 30° (π/6) | 45° (π/4) | 60° (π/3) | 90° (π/2) |
|---|---|---|---|---|---|
| sin θ | 0 | 1/2 | √2/2 | √3/2 | 1 |
| cos θ | 1 | √3/2 | √2/2 | 1/2 | 0 |
| tan θ | 0 | √3/3 | 1 | √3 | undefined |
Reference angles and the ASTC rule
For an angle outside the first quadrant, the reference angle is the acute angle between the radius and the x-axis. The reference triangle is a mirror image of a first-quadrant one, so the sizes of sin, cos and tan are the same as for the reference angle — only the signs change. The signs come straight from the coordinates: x is negative on the left, y is negative below. The mnemonic ASTC (“All Students Take Calculus”) records which functions are positive in quadrants I to IV: All, Sine, Tangent, Cosine.
Example: 150°. It lies in quadrant II, and its reference angle is 180° − 150° = 30°. So the values are those of 30° with quadrant-II signs: cos 150° = −√3/2 and sin 150° = 1/2. The point is (−√3/2, 1/2) ≈ (−0.866, 0.5), and tan 150° = (1/2) ÷ (−√3/2) = −√3/3.
Tangent as a length
tan θ = sin θ / cos θ is the slope of the radius. Extend the radius until it meets the vertical line x = 1, which touches the circle (it is a tangent line): the height at which it meets that line is tan θ — the green segment. As θ approaches 90° the radius becomes vertical, never meets the line, and the tangent is undefined. The reciprocal functions are sec θ = 1/cos θ, csc θ = 1/sin θ and cot θ = 1/tan θ.
From circle to wave
Plot the height of the point against the angle and you get the sine wave; plot its horizontal position and you get the cosine wave. Going once round the circle is one full period, which is why both graphs repeat every 360° (2π). Because x² + y² = 1 on the circle, sin²θ + cos²θ = 1 for every angle. You can draw the waves yourself in the function grapher, or solve a full triangle with the triangle calculator.
Experiments to try
- Find every angle between 0° and 360° where sin θ = 1/2. What do those angles have in common? Repeat for cos θ = −√2/2.
- Compare 40° and 140°. Which of sin, cos and tan are equal, and which are opposites? Explain using the two reference triangles.
- Drag slowly from 80° to 100° and watch the green tangent segment. Describe what happens and why tan 90° is undefined.
- For which angles is sin θ = cos θ? Find them on the circle, then find the same angles where the two waves cross.
- Type −30 and 330 in the degree box. Why do they give the same point? Find a third angle that lands there too.
Frequently asked questions
What is the unit circle in simple terms?
It is a circle of radius 1 centred at the origin. For any angle measured anticlockwise from the positive x-axis, the point on the circle has x-coordinate cos of the angle and y-coordinate sin of the angle.
What are the coordinates on the unit circle at 150 degrees?
At 150 degrees (5 pi/6 radians) the point is (−√3/2, 1/2), about (−0.866, 0.5). The reference angle is 30 degrees and the point is in quadrant II, so cosine is negative and sine is positive.
How do I remember the signs of sin, cos and tan in each quadrant?
Use ASTC, often remembered as “All Students Take Calculus”. In quadrant I all three are positive, in quadrant II only sine, in quadrant III only tangent, and in quadrant IV only cosine.
How do I convert degrees to radians?
Multiply the number of degrees by pi/180. For example 60 degrees is 60 × pi/180 = pi/3 radians, and 180 degrees is exactly pi radians. To go back, multiply radians by 180/pi.
Why is tan 90° undefined?
Tangent is sine divided by cosine, and cos 90° = 0, so the division is not possible. On the unit circle the radius is vertical at 90° and never meets the tangent line x = 1.
What is a reference angle?
It is the acute angle between the terminal side of an angle and the x-axis. An angle and its reference angle have the same sine, cosine and tangent up to sign; the quadrant decides the signs.