Length, Mass & Temperature Converter

Choose one quantity, enter one value and inspect the conversion formula. Temperature readings and temperature differences are separate modes. No account or data upload is needed.

Factory measurements & everyday useFreeNo sign-up

One value only; no CSV is needed. Use a decimal point, or scientific notation such as 1.5e3. Do not type commas or unit symbols in the value field.

Changing an input clears the previous summary. Examples replace the fields. Swapping units keeps the entered value; convert again afterward.

Printing opens your browser's print dialog; choose Save as PDF if available. This is not a direct PDF download.

Choose the quantity before the units

This focused converter supports length (mm, cm, m, in, ft), mass (g, kg, lb), absolute temperature (°C, °F, K) and temperature intervals (Δ°C, Δ°F, ΔK). It never mixes dimensions. Here, lb means avoirdupois pound mass, not pound-force; ft means the international foot, not the former U.S. survey foot. Pressure, currency, density and mass-to-volume conversion are outside this tool.

Definition factors, not rounded table entries

The conversion definitions are 1 in = 0.0254 m = 25.4 mm; 1 ft = 0.3048 m = 12 in; 1 lb = 0.45359237 kg; 1 kg = 1000 g; 1 m = 100 cm = 1000 mm. The code retains these finite decimal factors as exact rational numbers. It does not substitute the rounded pound factor sometimes shown in compact tables.

For length and mass, convert using value × source factor ÷ target factor, with factors expressed in metres or kilograms. For example, 2.5 in × 0.0254 m/in ÷ 0.001 m/mm = 63.5 mm. Signed values can represent offsets or changes; they do not mean that a physical mass is negative.

A temperature is not a temperature difference

An absolute reading uses an offset: °F = °C × 9/5 + 32; K = °C + 273.15. For example, 20 °C = 68 °F = 293.15 K. Readings below 0 K, −273.15 °C or −459.67 °F are rejected, including when source and target units are identical.

A difference has no offset: Δ°F = Δ°C × 9/5 and ΔK = Δ°C. A rise of 10 °C is a rise of 18 °F, not 50 °F. A difference of −18 °F is −10 °C. Choose the interval mode when converting a temperature tolerance or rise, not the temperature of the part itself.

Examples and a reviewable summary

The page opens with 1 in → 25.4 mm. Use the example button for 1 lb → 0.45359237 kg, 20 °C → 68 °F, or 10 Δ°C → 18 Δ°F after choosing its quantity. The summary includes the entered value, units, mode, formula, result and interpretation limits. It remains free to print or save using the browser dialog. Input edits remove the old summary and disable printing until a new conversion is made.

Precision, scope and privacy

The input is a decimal or scientific-notation number of at most 100 characters. Scientific exponents must be between −100 and 100. A nonzero input and result must have magnitude between 1e−100 and 1e100; zero is allowed. Values outside these bounds are rejected rather than overflowing or silently becoming zero.

Results display up to 12 significant digits. Exact definition factors do not add precision to measurements, propagate measurement uncertainty or establish calibration. For an engineering decision, keep the original measurement precision and specification units consistent. Use the tolerance stack-up tool or capability tool only after checking their separate assumptions.

The converter does not read input values from URLs, save them in browser storage or send them over the network. Reloading restores the example. A saved or printed summary is under your control.

Primary references

NIST: SI units of length gives the exact international inch relationship. NIST SP 811, Appendix B.9 separates temperature and temperature-interval formulas; its mass footnote 22 gives the exact avoirdupois pound factor rather than the rounded table entry. Definitions and source scope were checked for this implementation.

Frequently asked questions

Can I convert pounds to newtons?

Not here. lb is pound mass; a force conversion is a different quantity and must not be inferred from the mass result.

Why is 10 °C different from a change of 10 °C?

An absolute temperature includes a scale offset. A difference uses only a scale factor: 10 °C is 50 °F, but a difference of 10 °C is a difference of 18 °F.

Does changing the input update the printed summary automatically?

Changing inputs clears the previous summary. Convert again before printing; the print action checks that the summary still matches the fields.

Are my inputs uploaded or saved?

No. This converter uses local arithmetic, does not read input values from query parameters and does not save entered values. Reloading restores the example.

Do exact factors guarantee an exact measurement?

No. Conversion definitions can be exact while your measurement has limited precision or uncertainty. Displayed results are rounded to 12 significant digits.